specifications subject to change without notice. dimensions (mm). see appendix a for recommended power cord. see pdi full line catalog for detailed specifications on power cords. iec 60320 inlet socket with switch, single and double fuse holder, flange mount hgn-375 mechanical dimensions features the hgn-375 protects electronic equipment from common and differential mode line interference in the range of 10khz up to 30mhz. this ?combi-unit? is equipped with iec connector, fuse holder for one or two 5 x 20 mm fuses, 2 pole on/off switch and fully enclosed metal housing. these filters are also available for medical equipment with low leakage current. hgn-375 series filters are high performance filters and have been designed to bring various medical equipments into compliance with en55011 and fcc part 15j, class b conducted emissions limits. applications computer & networking equipment, measuring & control equipment, data processing equipment, laboratory instruments, switching power supplies, other electronic equipment. technical data ? rated voltage: 125/250vac ? rated current: 1a, 2a, 4a, 6a, 10a ? power line frequency: 50/60hz ? max. leakage current each line to ground: @ 250vac 50hz: 0.5ma, max @ 250vac 50hz: 2 a*, max ? hipot rating (one minute) line to ground: 2250vdcline to line: 1450vdc ? temperature range: -25c to +85c * medical application (unit: mm) 60.5 0.8 typ. 52.0 33.5 67.0 40.0 + - - 0.2 o use only with a 250v fuse employer uniqement avec un fusible de 250v 28.5 6.30 typ. 57.5 45.0 6.0 4x r0.5 2x m3 40.0 + - - 0.2 61.5 29.5 79 145 algonquin parkway, whippany, nj 07981 ? 973-560-0019 ? fax: 973-560-0076 e-mail: filtersales@powerdynamics.com ? www.powerdynamics.com
attenuation tables & schematics hgn-375 series example & ordering code current rating (a): schematic: hgn-375 - - 1m f2 = 1 = 2= 4 = 6 = 10 fuse option: medical applications non-medical applications current rating 1a 2a4a 6a 10a insertion loss in db (50 ohm circuit) insertion loss in db (50 ohm circuit) comm. mode(l-g) mhz diff. mode(l-l) mhz .01 .05 .1 .15 .5 1 5 10 30 .01 .05 .1 .15 .5 1 5 10 30 24 33 38 40 51 46 35 31 21 3 10 7 16 60 75 89 80 39 16 30 35 37 41 42 37 29 21 5 12 10 11 60 73 82 82 39 10 17 20 22 30 32 32 30 23 8 10 16 19 40 67 84 80 40 8 13 17 19 26 29 29 29 25 5 8 15 16 30 51 79 80 50 5 6 15 17 30 51 79 80 51 2 9 13 17 26 33 53 60 40 l(mh) l(mh) 2200pf 2200pf n' e' p' n e p line load 0.01 f 0.068 f 0.033 f fuse fuse 1m l(mh) l(mh) n' e' p' n e p line load 0.01 f 0.068 f 0.033 f fuse fuse 1m = blank = m standard type without c(y); c(x) only = f1 = f2 1 fuse (5x20mm), 6.3/0.25 quick connect 2 fuse (5x20mm), 6.3/0.25 quick connect l value 10.3ma 4.6ma2.5ma 1.2ma 0.8ma current rating 1a 2a3a 4a 6a l value 10.3ma 4.6ma2.5ma 1.2ma 0.8ma comm. mode(l-g) mhz diff. mode(l-l) mhz .01 .05 .1 .15 .5 1 5 10 30 .01 .05 .1 .15 .5 1 5 10 30 23 32 38 41 51 48 36 31 22 2 10 8 15 60 75 84 80 39 18 30 35 36 41 42 37 30 21 5 12 10 10 60 73 82 83 36 10 18 20 22 30 32 32 30 22 8 10 17 19 40 67 84 80 33 8 13 17 19 26 29 29 29 24 5 7 15 17 30 51 80 80 41 8 13 16 19 25 28 29 29 24 5 5 15 18 30 51 79 80 51 80 145 algonquin parkway, whippany, nj 07981 ? 973-560-0019 ? fax: 973-560-0076 e-mail: filtersales@powerdynamics.com ? www.powerdynamics.com
|